Bootstrapping Connectivity
Reticulum can operate completely offline over local radios or ethernet multicast, but it can also connect to the global Reticulum mesh over TCP, UDP, or I2P.
Configuring Interfaces
Open ~/.reticulum/config in your text editor. Interface definitions reside under the [interfaces] section.
Local Network Auto-Discovery (AutoInterface)
To discover and connect automatically to any other Reticulum nodes on your local Wi-Fi or Ethernet LAN:
AutoInterface uses IPv4/IPv6 link-local multicast (UDP port 29716) to peer with neighboring nodes without manual configuration.
Connecting to an Existing Node over TCP (TCPClientInterface)
To connect to a remote Reticulum node or hub over the internet:
[[gonomadnet Public RRC Hub]]
type = TCPClientInterface
enabled = yes
target_host = go-nomadnet.duckdns.org
target_port = 4242
Once connected to go-nomadnet.duckdns.org:4242, all public services hosted on the hub are immediately reachable over the mesh:
| Service Daemon | Destination Hash | Protocol / URL | Description |
|---|---|---|---|
| gonomadnet Node | <c7d0e7bbd883e595f53e14fa6986188c> |
nomadnetwork://c7d0e7bbd883e595f53e14fa6986188c |
Live Micron pages served over Reticulum. |
| gorrcd Chat Hub | <a012129c10205c0b9441fcd2b755b2a7> |
rrc://a012129c10205c0b9441fcd2b755b2a7/#general |
Public RRC chat hub. Home of @gobot! |
| gorngit Repos | <58a0406047ec2e7ce23e9e9a83b744df> |
rns://58a0406047ec2e7ce23e9e9a83b744df/<repo> |
Git clone & push over Reticulum mesh links. |
| gorngit Pages | <cb3677a1bb8e37f334096566ed8ff895> |
nomadnetwork://cb3677a1bb8e37f334096566ed8ff895 |
Micron code browser for mesh-hosted repositories. |
| golxmd Propagation | <7acc095f0e83182feb58c888d090a3cc> |
lxmf.propagation |
Store-and-forward LXMF message propagation node. |
Popular public bootstrap and testnet nodes include:
| Hub / Location | Target Host | Port | Notes |
|---|---|---|---|
| Go Reticulum Public Hub | go-nomadnet.duckdns.org |
4242 |
Official Go Reticulum public hub |
| Between The Borders (US) | reticulum.betweentheborders.com |
4242 |
Community testnet node |
LoRa Radio Interface (RNodeInterface)
To connect a LoRa radio flashed with RNode firmware over USB serial:
[[LoRa RNode]]
type = RNodeInterface
enabled = yes
port = /dev/ttyUSB0
frequency = 915000000 # e.g., 915000000 for US, 868000000 for EU
bandwidth = 125000
txpower = 17
spreadingfactor = 9
codingrate = 5
Use gornodeconf to inspect, provision, and test the connected RNode.
Verifying Mesh Connectivity
Once interfaces are configured and Reticulum is running:
1. Check Interface Status
Ensure the configured interface shows Status: Up and that traffic counters increment.
2. Probe Reachability
Query paths to an announced destination hash:
If a path is known, it outputs the hop count, next hop interface, and path metric.
To ping a remote destination:
Output: